5
to
Easy
• Make sure viewing window is at eye level
so you can
watch V-Go fill
with insulin
• V-Go should be filled with insulin in a
continuous flow of droplets,
not
a
steady stream
• Slowly
push plunger all the way down.
This should take about 25 seconds
• Slowly pull up plunger
as far as it can go
• Wait 5 seconds
Fill V-Go™ with insulin
Viewing
Window
Minimum of
25 seconds
Step
5
Check V-Go
Step
6
• Check that V-Go is full of insulin.
In
viewing window, you should see only
fluid and no air space. Having a few
small bubbles is normal and harmless
• If V-Go is not full:
–Push insulin vial firmly all the way into
insulin vial holder
–Replace insulin vial if empty
–Push EZ Fill drawer all the way closed
• Repeat Steps 4 and 5 to fill V-Go
Plunger
Slowly
Draw insulin into EZ Fill
Step
4