V-DESK POP 600 Скачать руководство пользователя страница 15

GENERAL INFO

1. Power supply 100v - 240v 50-60Hz

2. Service Environment 0-40 degrees celsius.

3. Unplug the power before cleaning. Avoid getting water into the internal parts.

4. The electric box contains electronic components, metals. plastics, wires etc. so dispose of it in accordance with each 
country’s environmental legislation, not the general household waste.

5. Check carefully to ensure correct and complete assembly using.

6. Be familiar with all functions and program settings of the product before first use.

7. Children are forbidden to play on the product because of unforeseen action when playing.  

8. Slight noise caused by the ribbed belt or brake system will not have any effect on the use of the product.

9. Corrosive or abrasive materials are forbidden to clean the equipment.

10. This appliance should not be used by children under the age of 8 years and any persons with reduced physical, sensory mental 
capabilities or lack of experience and knowledge must be given supervision or instruction when using this product.

11. Cleaning and maintenance of this product must not be undertaken by children.

12. If the power supply cord is damaged, it must be replaced by the manufacturer or a suitably qualified person.

13. Please make sure that the plastic bags used to wrap some components are kept away from children as the pose a threat to life from suffocation.

14. It is advised to keep packaging for this product in case of the need for future transportation.

Содержание POP 600

















Отзывы: