background image

SAVE THIS MANUAL FOR FUTURE REFERENCE

Bikes – (2) options
  Option One:

•  ** Use the hooks to hold bikes securely in place, by 

placing the red end of the hook around the neck of 

the bike seat. See fig 13.

  Option Two:

•  Loop one piece of the bike cable through the rim of 

the front tire then connect the clip to the oblong ring attached to the hook bar.

•  Loop the second piece of the bike cable through the rim of the back tire then 

connect the clip to the oblong ring attached to the hook bar.

Golf Bags

•  Golf bags should be hung by the carrying handle – NOT the shoulder strap.

Canoe/Kayak

 – (capacity on hook bar must not exceed 200 pounds)

Spare Tires

Storage Net

 – ideal for balls, toys, helmets, etc.

Ladders

Tools

OPERATING INSTRUCTIONS

Garage Gator Motorized Storage Unit

16

TO RAISE OR LOWER THE HOOK BAR:

TO LOAD THE HOOK BAR:

Examples of items that can be stored:

• 

**Do not stand under the lift.

• 

Turn the key in the hand control switch to the “ON” position.

• 

Press and hold the rocker switch in the direction you want the hook 

bar to travel.

• 

Release the switch when desired location is reached.

• 

Lower the hook bar to a comfortable height.

• 

**Evenly distribute the weight of articles stored.

• 

Do not overload the hook bar – maximum capacity is 220 pounds.

• 

Be sure items are secured before raising the hook bar.

• 

**Make sure load is secure before lifting.

DO NOT OVERLOAD THE HOOK BAR.

Maximum capacity is 220 pounds for all articles on the hook bar. Be sure to distribute weight evenly.

THE GGR3672PS 

(PLATFORM SERIES) IS AVAILABLE.

FIG. 13

FIG. 13

Содержание Garage Gator GGR220



















Отзывы: