2) Remove all test leads from the input socket.
3) Unscrew the captive screws of the battery cover and remove it.
4) Remove the battery cover.
5) Replace the new 6F22 9V battery
6) Install the battery cover as it is, tighten the screws.
Note
：
The polarity of the battery can not be installed.
5.2 Replace the pen
Warning
When changing the test leads, you must replace the same
or the same grade of the test leads. Table pen must be intact,
table pen level: 1000V 10A.
If the pen insulation is damaged, such as wire wire exposed, you must replace the test
pen.
6. Attachment
1
）
Table pen
Grade
：
1000V 10A
一付
2
）
Instruction
一本
3
）
Temperature probe
一付
4
）
Battery
6F22 9V
一支
* The contents of this manual are subject to change without notice *
* The contents of this manual are considered correct, if the user found errors, omissions,
etc., please contact the manufacturer *
* The Company does not assume any accidents and hazards caused by incorrect operation
of the user *
* The functions described in this manual do not serve as a reason for the use of the
product for special purposes *
Product warranty instructions
Product certification is your instrument in the use of failure, seeking repair
services must have, and then you purchase the invoice at the same time to be effective.
1) When your multimeter in use fails, please contact our maintenance department as
soon as possible, consultation, so as not to delay your use and warranty period.