15
Nivo®Guide 3100 • Two-wire 4 … 20 mA/HART
5 Set up with the display and adjustment module
61268-EN-190215
Application
In this menu item, you can select the application. You can choose
between level measurement and interface measurement. You can
also choose between measurement in a vessel or in a bypass or
standpipe.
Medium - dielectric constant
ÆÌÀÁËŽÆÍÁ̽ÅƓÑÇÍ»¹Æ¼½ŲƽÌÀ½ÌÑȽǾŽ¼ÁÍÅƼÈÊǼͻÌƽƖ
Max. adjustment
ÆÌÀÁËŽÆÍÁ̽ÅƓÑÇÍ»¹Æ½Æ̽ÊÌÀ½Å¹ÐƖ¹¼ÂÍËÌŽÆ̾ÇÊÌÀ½Ä½Î½ÄƖ
Enter the appropriate distance value in m (corresponding to the
percentage value) for the full vessel. The distance refers to the sensor
ʽ¾½Ê½Æ»½ÈĹƽƼ˽¹ÄËÍʾ¹»½Ç¾ÌÀ½ÈÊÇ»½ËËŲÌÌÁÆ¿ƽƖ½½ÈÁÆÅÁƼÌÀ¹Ì
ÌÀ½Å¹ÐƖĽνÄÅÍËÌÄÁ½º½ÄÇÏÌÀ½¼½¹¼º¹Æ¼Ɩ
Min. adjustment
In this menu item, you can enter the min. adjustment for the level.
Enter the suitable distance value in m for the empty vessel (e.g.
¼ÁË̹ƻ½¾ÊÇÅÌÀ½Ŵ¹Æ¿½ÌÇÌÀ½ÈÊǺ½½Æ¼ƽ»ÇÊʽËÈÇƼÁÆ¿ÌÇÌÀ½È½Ê
-
centage value. The distance refers tot he sensor reference plane (seal
ËÍʾ¹»½Ç¾ÌÀ½ÈÊÇ»½ËËŲÌÌÁÆ¿ƽƖ
Linearisation
A linearisation is necessary for all vessels in which the vessel volume
¼Ç½ËÆÇÌÁƻʽ¹Ë½ÄÁƽ¹ÊÄÑÏÁÌÀÌÀ½Ä½Î½ÄƘ½Ɩ¿Ɩ¹ÀÇÊÁÒÇÆ̹ĻÑÄÁƼÊÁ
-
cal or spherical tank, when the indication or output of the volume is
required. Corresponding linearisation curves are preprogrammed
for these vessels. They represent the correlation between the level
percentage and vessel volume.
À½ÄÁƽ¹ÊÁÒ¹ÌÁÇƹÈÈÄÁ½Ë¾ÇÊÌÀ½Å½¹ËÍʽ¼Î¹ÄͽÁƼÁ»¹ÌÁÇƹƼÌÀ½
current output. By activating the suitable curve, the percentage vessel
volume is displayed correctly.
Level measurement
Linearisation
