UWS X80, Руководство пользователя

Страница: 14 / 16

9. Connecting to an External Sensor
9. Connecting to an External Sensor
The X80
Repeater
can connect to an external sensor that has a contact closure output. This
feature allows a camera to be triggered by various types of sensors in addition to the motion
detector (i.e. seismic, magnetometer, pressure pad, etc.).
The “
Repeater
to External Sensor Connector Kit” (sold separately) is required to connect to an
external sensor. This kit includes a 9 foot cable with an X80
Repeater
connector on one end, and
open wires on the other end. The kit also includes an extra X80 connector. The wiring is shown
below:
To trigger the
Repeater
, the external sensor must be wired so that it closes the connection
between Pins 1 and 3 when it is activated (Brown and Green/Yellow).
X80
Repeater
User's Manual v1.2 13
NOTE: T
he “
Repeater
to External Sensor Connector Kit” shown below
(sold separately) is required to connect to an external sensor.
Pin Wire Color Function
1 Brown Input (1K pull up to battery voltage)
2 Blue Not used
3 Green/Yellow Ground
NOTE: The external sensor must provide a “dry contact” type output.
Do not connect any voltage to the
Repeater
pins.