UWELL HAVOK V1 Скачать руководство пользователя страница 10

- 6 -

6. Puff counter

For every vape lasting longer than 1 second would be counted 
as 1 puff. The vape shorter than 1 second won’t be counted. The 
maximum record is 9,999 puffs. Hold the "+" and "-" buttons for 2 
seconds until "PUFF CLEAR" is displayed. After 
releasing the buttons, the number of puffs is cleared.

7. Resistance detection

Resistance detection shall be done automatically. Resistance 

range is 0.2 - 3Ω; 

a. If there is no pod or the resistance of the coil 
    is too high, press the fire button the screen 
    will indicate open circuit.

b. If the resistance of the coil is too low, press the 
    fire button the screen will indicate short circuit.

8. Low power indication

When the voltage is too low, press the fire button 
the screen will indicate low battery.

9. Temperature protection 

The output will be cut off if the PCBA temperature increase to 
80°C during vaping, the screen will display “Too Hot! Please 
Wait”; 10 seconds later the temperature will 
stop and you are free to vape again.

10. Charging

Charge battery with Type-C of 5V/2A, the screen

 

will indicate charging.

11. Factory reset

Hold the fire button, “+” and “-” button for 3 seconds the screen 
will display “Factory Reset”, release the buttons the screen will 
exit to the defaulted wattage, and the puff 
counter would be cleared.

Содержание HAVOK V1













Отзывы: