12
INSTRUCTION FOR USE
Selecting Weight Unit
Press
MODE
to shift among various weight units (gram,
lb/oz and Taiwanese) with or without backlight if required.
Refer to page 8 for internal setting procedures. (For
backlight, just keep pressing the mode until the display is
backlit)
The weight unit used before power off will be employed
when the scale is turned on again.
Set Display Value to Zero when Unloaded
Press
ON/ZERO
to set weight displayed to zero when
unloaded. Refer to
SPECIFICATIONS
for maximum zero
range.
Tare off the Weight of a Container
When a container is used, follow the steps below to tare off
the weight of it and to obtain a net weight result.
a.
Remove all loads away from platter
b.
Make sure that zero weight and the
ZERO INDICATOR
appear. If not, press
ON/ZERO
to set it to zero weight.
c.
Place the container on the platter.
d.
Press
TARE
.
