UWE W75 Series, Руководство по эксплуатации

Страница: 14 / 21

1. If scale detects the total weight of samples on the platter are smaller than 20d, the PCS
​ ​
sign will
start flashing as warning. Press
​
ZERO
​
key to change the sampling quantity setting or add more
samples until the signal is off.
2. If scale detects the unit piece weight of the sample is smaller than minimum unit weight, the
PCS sign will start flashing as warning (unit piece weight must not small than 0.5d). It is
recommended using smaller capacity scale for this sampling.
3. When PCS sign flashes, sampling process can still in process but might result errors.
5.5 CHECK WEIGHING FUNCTION
This indicator is equipped with check weighing function which allowing users to set high and low
limits to quickly checking the weight of each product within the range or not.
a. Indicator is on and both Zero indicator and Stable indicator are on
b. Press and hold
​
MODE
​
until display shows
​
CHK W
c. Press
​
MODE
​
to enter and display shows Hi for hi limit setting, press
​
ZERO
​
for value increment
and
​
TARE
​
for shifting digits. Press
​
MODE
​
to confirm and entering low limit setting
d. Display shows
​
LoW
​
, press
​
ZERO
​
for value increment and
​
TARE
​
for shifting digits. Press
​
MODE
again to confirm and entering alarm setting
e. Display shows
​
bEEP
​
first and then showing
​
bb-no
​
, press
​
ZERO
​
for options
​
bb-Go
​
,
​
bb-H.L
​
,
​
bb-Hi
​
,
and
​
bb-Lo
Display Description
bb-no No alarm for any weighing result
bb-Go Alarm activates when weighing result falls within the range
bb-H.L Alarm activates when weighing result falls outside the range
bb-Hi Alarm activates when weighing result higher than the range
bb-Lo Alarm activates when weighing result lower than the range
NOTE:
1. Check weighing function can be engaged under any weighing unit including piece counting
mode. When the weighing unit is PCS and check weighing mode is activated, display will show
CHK P
​
for checking piece.
2. If check weighing limits have been programmed before, display will show
​
PrEV
​
for resuming the
previous setting or not when entering the setup. Press
​
MODE
​
to confirm using the previous
setting or
​
ZERO
​
to set new limits.
3. To temporary disable check weighing function, press and hold
​
MODE
​
again to enter check
weighing setup and press
​
ZERO
​
when displays
​
CHK W