UWE VGP-15, Руководство по эксплуатации

Страница: 13 / 19

5 INSTRUCTION TO USE
The price computing scale VGP/VOP is easy to use and user friendly. Everyone
can start using the scale by following the below steps:
a.
The scale is placed on a solid surface
b. Use adjustable feet and referring to the bubble level to make sure scale is in
a level position
c. Power on the scale and wait for the counting down
d. Scale is in zero weight status and display showing zero indicator
e. If zero indicator is not on, press ZERO to set the display to zero
f. If zero weight status cannot be obtained, change the location and try again
5.1 WEIGHING
The standard procedure of a successful weighing is by placing the item on
platter first and use the numeric keypad to enter the unit price. The gross
weight of the item is displayed in the
WEIGHT window and price entered is
displayed in the UNIT PRICE window.
When item is placed on platter and unit price is entered, scale will show the
price of such item on
TOTAL PRICE
window.
To start the next weighing, remove the item from platter and put on the next
item. Use the numeric keypad to enter the unit price and price will be shown in
the
TOTAL PRICE window.
NOTE: Unit price will return to zero when item is removed from platter
according to the legislation. Press FIX to use the same unit price for all
subsequent weighing if needed. A FIX indicator will appear to remind the user
of the current setting
5.2 HOW TO USE TARE FUNCTION
When a container is used, refer to the below steps to tare off the weight of the
container to obtain the net weight result.
a.
Platter is empty and ZERO indicator is on
b. Put the container on platter first and press TARE
After
TARE is pressed, the NET indicator will appear.
5.3 HOW TO CLEAR TARE FUNCTION