Under this function, the scale will be turned
off automatically if it is not used for 4 minutes.
Follow the below steps to enable/disable the
AUTO POWER OFF FUNCTION.
a. Turn scale off.
b. Press and hold
TARE
, then turn scale on.
c. Scale displays
F.1
.
d. Press
TARE
until scale displays
F.4.
e. Press
NC/EURO
to shift between
0._OFF
and
4
._OFF
.
**
To enable the
AUTO POWER OFF FUNCTION
, press
ZERO
when 4._OFF appears.
**
To disable the
AUTO POWER OFF FUNCTION
,
press
NC/EURO
when 0._OFF appears.
f. After
ZERO
is pressed, the scale returns
to operation status.
4.3 BACKLIGHT (OPTION) SETTINGS
Follow the below steps to disable or change
backlight (option) setting.
NOTE
: Only change the backlight settings
before entering a unit price.
4.3.1
Disable Backlight
Press
0
and then press
ZERO
to disable
backlight.
4.3.2
Turn Backlight On
: -
Power Saving Mode
Press
1
and then press
ZERO
to enable power
saving backlight
Under this mode, backlight will be turned off
after it has been left idle for 20 seconds.
Backlight will be automatically turned on again
when a new weight is detected or when a key
is pressed.
4.3.3 Turn Backlight On
: -
Continuous Mode
Press
2
and then press
ZERO
to turn backlight
on.
Under this mode, the backlight will remain
powered on until the backlight is manually
turned off (by
4.3.1
method) or a new backlight
command (
4.3.2
) is entered.
