UWE BW-150, Руководство по эксплуатации

Страница: 6 / 11

b. To employ (disable) the Auto Hold Function,
press and hold RECALL/SET until “b.- 150” and
5 arrows beneath appears(disappears).
c. Release RECALL/SET and scale will return
to normal operation status.
4.4 TO TARE OFF THE WEIGHT OF A CONTAINER/ SET
WEIGHT TO ZERO
4.4.1 Place a container onto the platform,
then press and hold FUNCTION until zero weight
is displayed.
4.4.2 To Clear Container Weight from Memory
To clear the weight of the container stored,
remove the container and all loads from the
platform. Press and hold FUNCTION until zero
weight displayed.
4.4.3 Zero the weight value is not displayed
when the scale is unloaded, press and hold
FUNCTION to reset weight to zero.
4.5 WHEN WEIGHING
Always apply load to the platform gently.
Sudden shock/excessive force may cause damage
to the weight sensor inside. It is a good
practice to remove all the loads from platform
immediately after weighed. This would prolong
the life time of the weight sensor.
4.6 HOLDING A WEIGHT DISPLAYED
4.6.1 When Auto Hold Function is not employed
Press RECALL/SET to employ the Auto Hold
Function.
4.6.2 When Auto Hold Function is employed
After Auto load is stable, the scale
would automatically retain the weight
displayed. 5 flashing arrows beneath the
weight would appear indicating the
weight displayed is being held. Weight
retained would be released
automatically 3 seconds after load is
removed.
4.7 SELECT BACKLIGHT (option) STATUS
The default setting of backlight is on.
Backlight would automatically go off 5
second after zero weight is detected and
automatically turned on immediately
when a load is detected.
To enable/disable backlight function,
press and hold ENTER unit the desired
status is attained.
4.8 MEMORY FUNCTION
4.8.1 Save Actual Weight to Memory . For actual
weight entry range, refer to GENERAL AND
OPERATIONAL SPECIFICATIONS
1. Select the appropriate weight unit.