d. Press
TARE
five times
e. Scale displays
F.7
f. Press
MODE
to select transmission mode
“
trAn1
”
or
“
trAn2
”
g. When the preferred data transmission mode shows on
display, press
ON/ZERO
to confirm and restart the
scale or
TARE
for next function setup
NOTE:
“
trAn1
”
is to transmit data continuously after reading
is stabled
“
trAn2
”
is to transmit single data only after reading
is stabled. However, scale will not send any data if
weight detected is less than the minimum load.
4.2.5 Select Auto Tare Function
This scale is equipped with auto tare function which
tares off the initial weight automatically when this
function is engaged. The tare weight is automatically
cleared when everything is removed from platter.
a. Scale is off
b. Press and hold
TARE
, then press
ON/ZERO
c. Scale displays
F.1
d. Press
TARE
six times
Содержание ADW-1500E
Страница 1: ......
