Page | 14
with battery tester. Approximately 1.7V for Lithium and
1.3V for NiMH is full power.
ii.
Ensure SD card is properly inserted and not in locked
position
iii.
Reset camera by removing batteries and SD card for
10 minutes
iv.
Cold temperature may decrease battery output
sufficiently to prevent camera from turning ON; check
batteries and ensure they are rated for cold
temperature
2.
Beeping Noise when camera turns ON
i.
Insert SD card
ii.
Ensure SD card is not locked
iii.
Format SD card in camera
iv.
SD card may not be compatible
3.
Camera will not take pictures or stops part way even
with full batteries
i.
SD card is not formatted correctly; format SD card in
camera
ii.
Ensure SD card is not locked
iii.
SD card is faulty or incompatible; try different SD card
and/or brand. Faulty or incompatible SD cards may
cause system conflict, system crash, and battery drain.
Always format SD card in camera and try different SD
cards if problem persists.
iv.
Batteries do not have enough power to activate
picture/video sequence
4.
Batteries run down quickly
i.
Avoid poor quality alkaline and rechargeable batteries,
avoid mixing different brands and ages of batteries as
battery life will be adversely affected. Different brands
of batteries will perform differently than others; try other
