UPOWER
TM
UPOWER-3000-48
Version 2.1
MAJ :
July 20
Miniparc du Verger
–
Bâtiment E
1 Rue de Terre Neuve
91940 LES ULIS
FRANCE
Tel: +33 9 72 52 70 03
Fax: +33 9 72 11 21 69
Email: [email protected]
Page 1 / 9
Before use, please take the time to read this datasheet and make sure
you understood the advices and caution of use.
•
Do not disassemble or modify the control unit. Doing so may result in fire or electric shock.
•
Make sure that the control unit is free of moisture or any liquid. Exposure to water or other liquid may result in fire or
electric shock.
•
Do not touch the plugs or switches with wet hands. Doing so may result in electric shock.
•
Before connecting or disconnecting cables, make sure that the power switch is turned OFF. Failure to do so may results
in fire, electric shock, or breakdown in the UV LED lamp. Before moving the control unit, disconnect all cables.
•
If an abnormal condition, such as smoking, abnormal heating, abnormal odor, or noise, occurs, stop using the control
unit immediately and turn OFF the power switch. Continued use may result in fire or electric shock.
•
Do not place the control unit in direct sunlight or in a very humid environment. Doing so may result in fire due to
internal temperature rise. Observe the limitations of the operating temperature and humidity.
•
Do not install the control unit perpendicularly. Always place the control unit on a stable and flat surface. Not doing so
may result in the control unit falling or toppling, which may cause bodily injury or control unit malfunction.
•
Do not pile up the control units. Doing so may result in fire due to internal temperature rise.
•
Use a cable manufactured by UWAVE to connect the UV LED lamp. Use irradiators that are suitable for the control unit
ratings. Doing so may cause control unit failure.
•
Please secure a wiring space to the back panel and respect bending radius of cables. Damaging the cables may result in
fire or electric shock.
Any incorrect use cancels the warranty.
Security of the user
