Operation Instruction:
II. Fixed Usage of Disinfection Bar. (Available to select the ULTRAVIOLET mode or OZONE mode for
disinfection)
.
1. Short press the switch of fixed mode “ ” to start up. Meanwhile, the intelligent HBS system will
automatically start. It will automatically switch off after 30 seconds if not performing any operation for the
energy conservation and environment protection.
2. Short press the switch of fixed mode “ ” again to select the disinfection mode: ultraviolet disinfection for
10 minutes (the screen displays “ ” ), ultraviolet disinfection for 20 minutes ((the screen displays “ ” ),
ozone disinfection for 70 minutes (the screen displays “ ” ).
3. During ultraviolet mode, long press, long press the switch of fixed mode “ ” for 1.5 seconds, and the
device will enter to the 30-second preparation phase, and the screen will display “ ” (without flashing).
During ozone mode, long press the switch of fixed mode “ ” for 1.5 seconds to choose weak ozone step
(intermittent work), for 5 seconds to choose strong ozone step (uninterrupted work, screen will display
“ ” ), after the selection, device will enter to the 30-second preparation phase.
·
If the intelligent HBS system doesn’t detect any person, the disinfection bar starts to disinfect after the
30-second preparation phase, and “ ” on the screen starts to flash. It will start to count down, “ ” ,
“ ” or “ ” will respectively change to “ ” , “ ” or “ ”
·
If the intelligent HBS system detects the person, the screen will display “ ” , “ ” will display no flash
and the disinfection bar stops the work; After continuing for 2 minutes, the disinfection bar will automatically
switch off
4. During the fixed-mode usage, the ozone disinfection will automatically stop after working for 60 minutes,
and automatically start the ultraviolet UVC to perform the ozonolysis for 10 minutes.
In handheld mode, there are “handheld manual" mode and “handheld automatic" mode:
1 “handheld manual” mode
·
In any state, long press the hand-held mode switch for more than 1.5 seconds without releasing your hand,
enter the hand-held manual mode
·
The UVC LEDs start to work directly, the screen displays “ ", and it will be turned off directly after
releasing the handheld mode switch
·
In this mode, the fixed mode switch is invalid
2. "handheld automatic" mode
·
In the light-off or fixed mode, double-click the handheld mode switch to enter the handheld automatic mode
·
The preset time for this mode is 60 minutes
·
If the object being disinfected is not detected by the REV-ODS system (the sensing distance will be slightly
different depending on the surface of the object), the disinfection work will be automatically suspended,
The “ " on the screen is displayed without flashing, “ " icon disappeared, the purple icon “ "
will be changed to black icon “ ", If the REV-ODS system does not detect the disinfected object for
2 minutes, it will automatically shut down, saving energy and protecting the environment.
·
If the REV-ODS system detects the sterilized object, it will automatically resume the sterilization work, The
“ " on the screen is displayed with flashing, and icon “ " appears, the black icon “ " will be changed
to purple icon “ ".
·
Short press or double-click the handheld mode switch during the work process to directly shut down, the fixed
mode switch is invalid
·
When the icon “ " disappears on the screen and the time is displayed as a green number 0: if you do nothing,
it will automatically shut down after 30 seconds, saving energy and protecting the environment.; if you short
press or long press the handheld mode switch, you can also shut down the light.
UVC
UVC
UVC
