High Definition AD Player User’s Manual
14
Chapter
4
Installation
(For
PF
series)
4.1 Installation
Install it according to the following steps:
1.
Open the package, take the machine and accessories out.
2.
Put wall mount up by suitable method.
3.
Check the power line, ensure the connection with A.C. power supply is in good condition
4.
Hang up machine properly, plug in the power cable
4.2 Mount on wall for smooth surface
1. Take wall mount out, paste double faced adhesive tape on its back fully.
2. Mark out the place where the hanging board is on the wall, which can be confirmed by rule, clean the wall
firstly.
3. Tear off the cover of double faced adhesive tape, and paste the wall mount.
4. Fill in glass cement all around.
5. Hang up the machine four hours later, and the four screws’ holes must coincide completely.
4.3 Mount on wall for unsmooth surface
1. Take out the wall mount.
2. Mark on wall mount for drilling.
3. Drill on the wall mount
4. Mark on the wall, which can be confirmed by rule
5. Mark positions of drilling, which can be confirmed by rule
6. Drill on the Wall
7. Place setscrew in the holes
8. Place double-side glue on the back of the wall mount
9. Paste the wall mount as preset position, fix the wall mount by screw
10. After installing wall mount, hang up the machine on it, and the four screws must coincide
