Hybridization Ovens
Page 7
81-0169-01 Rev Q
Installing the Rollers and Optional Trays
To insert rollers in the hybridization oven carousel, slide the rollers into the receptacle on the left side of the chamber
first, followed by the right side.
To install the
Rocker Tray
,
remove the metal carousel from the chamber. Place the tray into the chamber with the
coupling arm to the right side. Place the coupling sleeve over the motor drive shaft such that the pins on the inside of
the coupling sleeve engage the slots in the motor drive shaft of the chamber. Rotate the sleeve counter-clockwise 30°
until locked in place. To remove the tray, reverse the process.
To install the
Orbital Motion Tray
, open the chamber door, remove the carousel, connect the power cable to the
orbital tray and to the power port inside the unit, and place the tray in the oven so the switch is accessible. Turn the
hybridization oven Motor and Power switches ON, and turn the orbital tray Power switch ON.
To install the
Reciprocating Shaker Tray
,
place the tray over the rollers in the hybridization oven.
Reciprocating Shaker Tray
Rocker Tray
Orbital Motion Tray
