4.2.5 Terminal Active Dial-up
Hold on to Key 5, and “Call 2” indication will appear on the interface, which shows that the watch is dialing
the second phone number preset in it. When the phone is got through, the watch will enter the call interface.
Hold on to Key 6, and “Call 3” indication will appear on the interface, which shows that the watch is dialing
the third phone number preset in it. When the phone is got through, the watch will enter the call interface.
Remarks
：
For more information about the setting of the emergency alarm call and the Call 2 and Call 3
commands, please refer to the appendix.
4.2.6 Calling and Auto-answer
If there is an incoming call on the terminal, the interface will be
：
.
Then push the SOS key to get
through the call. If the call is not got through manually, it will be automatically answered 30 seconds later. At the
same time, one can also push the power on/off key to ring off.
4.2.7 Point to Point inquiry
Use one of the stored phone numbers to send SMS "123" to the GPS-202D installed SIM card number. After the
pre-existing mobile phone number will receive a location information, the information terminal the current
geographical location.
Information includes latitude and longitude location information and time.
5. Operation
1. How to get its location (Default Password: 0000 )
To get location (address) by SMS Command:
988+Password
E.g. you can send
988000
from your cell phone to GPS watch and you will get a SMS reply as below:
ShenNan Road, Nanshan Hi-tech Park, Shenzhen, China 5180057
To get location through Online tracking platform:
Visit
http://gps.webtrackings.com
and input your login ID and password and you can see its location on the web.
Contact us for login ID and password.
2
Set Master’s mobile phone number (for SOS calling)
SMS Command:
#710#mobile phone number # password##
For example, I want to set my own cell phone number 18675506905, I need to send
#710#18675506905#0000##
3
Set call 1, call 2 phone numbers. There is call 1 and call 2 buttons in the watch’s right side.
When you press call 1, it will it like making a calling by mobile phone.
NOTE: You must set 3 users’ phone number in this command. Otherwise it will not complete.
SMS Command: #711#call 1# call 2 # call 3 # password##
E.g. I want to set 3 users’ phone number: 88990011, 88990022, 88990033, i need to send
#711#88990011#88990022#88990033#0000##
7
7
/
10
Updated: Kevin Chu on May 12, 2011 Verion: V1.1
