4
Assembly guide for UVI chair STYLER | DEVIL | BACK IN BLACK
STEP 3
Clean all the screw holes. The holes are thermally treated to prevent damage and tearing after
prolonged use. Before inserting the screw, please clean all the holes by inserting the tool, bending it at
an angle and spinning it around the hole.
STEP 4
Attach the gas control mechanism (9) to the bottom plate (10). On the control mechanism, you will
find the word FRONT and an arrow pointing forward. Turn the mechanism, so that the FRONT sign is
facing the front part of the chair. Use the shorter screws M8x20mm (Shorter, C). Please, apply
reasonable strength.
