UVC SOLAR STORM 800 Скачать руководство пользователя страница 10

Exposure to UVC light

Never expose yourself, other people, or animals to UVC light; this can cause burns to your 

eyes and skin. If you are exposed to UVC for an extended time, see an Opthalmologists and 

seek medical attention immediately for care. 

How often does the UVC need to be serviced?

The UVC unit has been built with smart technology inside. Typically, 

UVC emitters will last for approximately 6000 treatments before 

requiring service. However, the actual number of cycles may vary 

depending based on operating conditions.

The equipment should never be disassembled, opened, or altered by 

the user. This could create a safety issue and will void the warranty.

FREQUENTLY ASKED QUESTIONS AND ANSWERS

How long does it take to complete treatment? 

Treatments can operate in as little as 10 minutes or as long as 60 

minutes, it ios depending on the room size, transport vehicle size, 

and the objects in the room. We recommend running the device for a 

total of 10 minutes for surfaces within 3’ of device and for up to 20 

minutes for surfaces that are 8’ in distance from device.

How do I clean a site if an accidental break occurs?

A lamp breaking is extremely unlikely to have any impact on your 

health. If a lamp breaks, ventilate the room for 30 minutes and 

remove the parts, preferably with gloves. Put them in a sealed plastic 

bag and take it to your local waste facilities for recycling. Do not use 

a vacuum cleaner.

What happens if remote is lost or broken?

UVC Experts can provide replacement.

How much mercury content is in each of the bulbs?

Each bulb contains a small amount of mercury measured at 4.4mg.

Does the product generate Ozone during a treatment? 

The UVC emitter uses a proprietary UVC germicidal bulb that does 

not gernerate Ozone. The environment is immediately accessable 

after a treatment is complete.

What is the odor detected after a treatment? 

The odor detected after a treatment is the reaction of UVC irradiation 

with particles of dust in the air, virol loads, skin oils on surfaces, and 

other contaminants.

How do i know if the treatment was successful?

UVC Experts sells color-changing cards (dosimeters) that change 

color when activated by UVC light.

What if lamp breaks?

Do not use the unit if lamps are broken. Some lamps may become 

discolored at the bottom but not broken. These are safe to operate 

with but should be replaced at earliest possible opportunity. Contact 

UVC Experts or your local distributor for a replacement.

213020

.0011

9

REV: 08/11/2021

Содержание SOLAR STORM 800












Отзывы: