3
8. indicating that it is time to replace the filter. Tap the
FILTER
button once to end the beeping. The filter light will remain on
as a reminder, but the appliance can continue to be operated.
The beeping will resume each time the appliance is turned on,
until the filter is replaced.
9. When the filter is replaced, please tap, and hold the
FILTER
button for 3 seconds. This resets the indicator light, and the
appliance will recalculate the new filter replacement time.
10. To turn off the device, simply press
POWER
again on
either the top of the device or the remote control.
1. NOTE: If your air purifier remains connected to
power after turning off, it will operate according
to the last settings used when you turn it on again.
The exception to this is UVC mode. This will need
to be manually reactivated any time the device is
turned back on.
