background image

700 U (C) User Manual 

 

 

Table of Contents   vii 

 

 

 

Handling the Battery 

 

Do not dispose of the battery pack in a fire. It may explode. Check with local 
waste management codes for disposal instructions. 

 

Do not force the battery pack into the phone. Improper installation can cause 
malfunctions or damage the battery pack. This may result in the risk of fire 
or personal injury. 

 

Use caution in handling batteries in order not to short the battery to 
conductive materials such as rings, bracelets, and keys. The battery and/or 
conductor may overheat and cause burns. 

 

Do not solder the battery terminals together. This may result in a cracked or 
leaking battery pack or the risk of fire. 

 

Do not open or mutilate the battery pack. Battery acid is corrosive and may 
cause burns or injury to eyes. If battery acid gets into the eyes, DO NOT 
RUB. 
Immediately flush the eyes with clean water and call a physician. 
Do not leave or store the battery pack in hot areas (Near fire, a heater, etc). 
High temperature can damage and shorten the life of the battery pack. This 
may result in a cracked or leaking battery pack or the risk of fire. 

 

 

 

Do not use a discolored, deformed or damaged battery pack in the phone. 
This may result in personal injury or the risk of fire. 

 

Do not open or mutilate the battery pack. Battery acid is corrosive and may 
cause burns or injury to skin or clothing. If battery acid is spilled, 
immediately flush the area with clean water to prevent injury. 

 

Do not use a cracked, leaking or odor emitting battery pack near an open 
flame.  

 

 

 

Do not leave or store the phone in areas where temperatures are more than 45 

°

C for a long period of time. High temperature can shorten the life of 

electronic devices, damage the battery pack, and warp or melt plastic parts. 

 

The battery cord is color-coded, the red line is positive (anode), the black 
line is negative (cathode) and the yellow line is a sensor output. 

 

Содержание UTS 700 U































































Отзывы: