Telephone’s Analogue Adapter – UTStarcom iAN-02EX (V1.8.2.17a) – Operating Manual
pag.12
CONFIGURATION PARAMETERS OF UTStarcom IAN-02EX ATA EQUIPMENT
Access parameters to the equipment:
IP address:
verify on ADSL modem
User name:
supervisor
Password:
Assigned by Eutelia
LAN/WAN PARAMETERS
WAN Configuration
DHCP on, for obtaining an IP address
automatically
WAN Provisioning Configuration
Status:
on
Device Mode Configuration
Device Mode:
Bridge
MTU Rate Setting
MTU Rate:
1460
NTP Configuration
NTP Server:
62.94.7.9
Expires:
86400
Time Zone:
+1
LAN Configuration
LAN IP
: 192.168.0.1
LAN Mask
:255.255.255.0
LAN Gateway
: 192.168.0.254
DHCP Configuration
Status
: Enable
Mode
: Auto
Pool Start IP
: 192.168.0.1
Pool End IP
: 192.168.0.254
Default Gateway
: 192.168.0.1
DNS 1
: 192.168.0.1
DNS 2
: 0.0.0.0
Domain:
eutelia.it
Least
time
: 86400
VOIP PARAMETERS
VoIP Protocol:
SIP (MGCP not_used)
VoIP User (User0)
Username
: telephone number
Password
: assigned by Eutelia
or modified via WEB
Displayname
: telephone number
Login Id
: telephone number
VoIP User (User1)
if subscribed
Username
: 2° telephone number
Password
: assigned by Eutelia
or modified via WEB
Displayname
: 2° telephone number
Login Id
: 2° telephone number
VoIP SIP
Local Port
: 5060
Proxy Address
: voip.eutelia.it
Proxy Port
: 5060
Registration address
: voip.eutelia.it
Registration port
: 5060
Outbound Proxy Address
: 0
Outbound Proxy Port
: 5065
Expires
: 300
SIP Domain
: voip.eutelia.it
Subject
: Eut-ATA03a
VoIP Audio Config (Port 1 & 2)
Codec Rate
: 30
Preferred Codec
: G.729A
VAD
: Enable
DTMF Tx Method
: RFC-2833 Enable
VoIP RTP
RTP Port
: 13456
VoIP Tone
Country Tone
: Custom Specific Tone
Rx Gain (db)
: 0
Tx Gain (db)
: 0
Ring
: 1000, 4000
Dial Tone
: 0, 0, 450, 0
Busy Tone
: 350, 350, 450, 0
Ring back Tone
: 1000, 4000, 450, 0
Call Waiting tone
: 4000, 4000, 450, 0
VoIP FAX
T.38 Fax
: enable
T.38 Port
: 49170
VoIP STUN
NAT Address
: ()
1
STUN Server Address
: stun.voip.eutelia.it
STUN Server Port
: 3478
Local Port
: 3478
Expires
: 60
Speed Dial
(not used)
Call Features
(not used)
Port1
: all services in off
Port2
: all services in off
1
The “NAT Address” item will be updated automatically with the public IP address following the authentication of the ADSL access.
