UTStarcom CDM8450SP, Руководство пользователя

Страница: 17 / 46

Using the Battery and Charger
Installing and Removing the Battery
䊳 To install, insert the battery into the opening on the
back of the phone and gently press down until the latch
snaps into place.
䊳 To remove, make sure the power is off. Press the
battery release latch up and remove the battery from
the phone at a 45-degree angle.
Charging the Battery
To use the Traver Charger provided with your phone:
1.
Plug the travel adapter into a standard outlet.
2.
Plug the other end of the travel adapter into the
bottom of your phone, with the battery installed.
It takes about three hours to fully recharge a completely
rundown battery.
Important Note:
It is vital that you use only approved travel chargers
and AC adapter chargers. Use of unauthorized accessories could
damage your phone and invalidate your warranty.
9
Basics