10
Figure 1.
Secure the crossbeams to the spreader bar using М6х40 screws (8 ea.), М6 washers (16 ea.), M6
nuts (8 ea.) and a 10 wrench (Figure 2).
!Attention! Screw hats must be pointing down.
Figure 2.
Crossbeams must be installed correctly. The holes must be positioned on the corners of the
structure and should not be covered by the plates.
Secure the underframe using М6х40 screws (8 ea.), М6 washers and М6 nuts and a 10 wrench
(Figure 3).
