- 1 -
Subject To Change Without Notice
IMPORTANT SAFETY CHECK LIST
PLEASE NOTE:
Trailers are not generally used every day. A trailer may
sit for extended periods of time between uses.
IMPORTANT:
Check all components thoroughly on the trailer before use
Make sure that the towing vehicle and the hitch on your vehicle is more than
capable of towing the trailer. It is important to check your vehicle owner’s manual
for trailer ratings.
Make sure the hitch is properly secured to the ball of the towing vehicle.
Make sure coupler is locked and the safety chains are attached to the trailer and
the vehicle.
Check the operation of all lights. Operating lights are mandatory on a trailer and
must operate correctly.
Inspect the trailer and all parts before use.
Check to insure that all Wheel Bolts are tight. Torque to 80 ft.-lbs. Re-tighten
after the first 50 miles, or 80 kilometers.
Check the tire pressure. Maximum 80 PSI (552 KPA) when carrying the
maximum rated load.
Re-pack the wheel bearings every 2000 miles or 3200 kilometers or a minimum
of once every year.
Check that the trailer coupler is fastened securely onto the trailer ball. The trailer
ball must be a 2” ball.
If your trailer has an optional side kit make sure all the bolts and pins are in place
and secured tight before transporting your trailer.
Do not exceed the Gross Vehicle Weight Rating ( G.V.W.R.) which is shown on
the trailer serial / certification label.
Balance and secure the load on the trailer. See the trailer loading section in this
manual.
Lubrication of the coupler, springs and the tilt mechanism should be done
periodically to stop corrosion and keep parts moving freely.
By following these simple instructions, you will maximize the life of your
trailer and help safely transport your cargo.