3
• ELECTRICAL SHOCK ALERT.
Wire motor to correct supply voltage. See motor nameplate and wiring diagrams, and check
voltage of power supply.
• ELECTRICAL SHOCK ALERT.
Unit must be securely and adequately electrically grounded. This can be accomplished by wiring
the unit to a ground metal-clad raceway system, or by using a separate ground wire connected to
the bare metal of the motor frame or other suitable means.
• ELECTRICAL SHOCK ALERT.
Do not disassemble the motor housing. This pump has no repairable internal parts, and
disassembling may cause leakage or dangerous electrical wiring issues.
• ELECTRICAL SHOCK ALERT.
Make certain the electrical power source is adequate for the requirements of the pump.
• ELECTRICAL SHOCK ALERT.
Never use an extension cord with this pump.
• CHEMICAL ALERT.
This product contains chemicals known to the state of California to cause cancer and birth defects
or other reproductive harm.
• HAZARDOUS PRESSURE ALERT.
Install pressure relief valve in discharge pipe. Release all pressure on system before working on
any component.
• EXPLOSION ALERT.
Do not use to pump flammable or explosive fluids such as gasoline, fuel oil, kerosene, etc. Do not
use in flammable and/or explosive atmospheres.
• PRODUCT DAMAGE MAY RESULT.
This pump is not to be used for irrigation or water systems.
• PRODUCT DAMAGE MAY RESULT.
Protect the power cable from coming in contact with sharp objects.
• PRODUCT DAMAGE MAY RESULT.
Do not run pump dry.
• PRODUCT DAMAGE MAY RESULT.
Pump and plumbing must be full of water before startup.
• PRODUCT DAMAGE MAY RESULT.
Do not pump water which contains sand, mud, silt, or debris.
• INJURY MAY RESULT.
Be careful when touching the exterior of an operating motor. It may be hot enough to be painful
or cause injury.
CAUTION
