UTILCO BLL-45-P, Инструкция по эксплуатации

Страница: 16 / 24

Pg. 16
BLL-45-P
4. Make sure all cuts are made perpendicular to the cutting head or damage will occur to blade
and head shear.
5. Advance the blade by pressing the advance trigger and start the cutting cycle.
6. Once cutting cycle is complete, retract the cutting blade by pressing the retract button.
NOTE: There is no need to advance tool to bypass. Once cut is complete, release the trigger.
This will save battery life, time, and the overall life of the tool.
7. You can back the ram up at any time during the cutting cycle, even without the battery.