MASTER plastering machine
5
The correct turn direction of the engines is established by an inverter switch on the control
board, which blocks the turn direction to avoid mistakes when starting.
The machine cleaning tools are found in different places of the chassis, and a big tool box is
supplied to keep tools and other parts, to allow the materials to be always accessible.
The load charge point is positioned as low as possible, to feed the machine easily. However,
for isolating materials (more volume and less weight) a supplement can be installed to enhance its
capacity and to reduce the load frequency.
The MASTER frame is equipped with four big platform revolving wheels (two of them with
brake and the other two without it), which allow an easy transport even in narrow spaces, a making the
machine to be always fix.
One of the most important MASTER features is that it can be easily dismantled into different
elements, in the way that most suits you: first, we can dismantle the complete mixing tower on the
machine chassis. Then, and to make it lighter during its transport, we unscrew the rear screws on the
feeding engine plate; to this aim use the stator turner over provided. Later we can take out the four
screws that join the hopper to the tubular chassis, discovering this way the big advantage of the new
MASTER against its counterparts in the market:
An easy to dismantle hopper on the tubular chassis and only in one go.
This way we can have a robust and stable machine completely dismantled and taken into parts
to be transported in your car or to give it the use you wish to in every moment.
