UTICOR MI-10, Руководство пользователя, Страница: 7 / 20

Page 7
On the back of the monitor is the power supply connector, the VGA input, the DVI input, the DP
connector, the connector on the Touch if the monitor is equipped with a touch screen, and 5
buttons for adjusting the OSD menu
Die Tasten sind bezeichnet mit:
4 - Monitor Back
Button OSD menu on the back of the monitor
POWER:
Monitor on / off.
MENU:
Enable and disable the OSD menu.
SELECT:
Confirm selection in OSD main menu or OSD submenu.
DOWN:
Selection of icons in the main and submenu as well as setting the values.
The value to be set is lowered.
UP:
Selection of icons in the main and submenu as well as setting the values.
The value to be set is increased.
5 - OSD Menü
After pressing the MENU button, the OSD menu is displayed as shown in the lower picture.
Then you can use the UP / DOWN buttons to select the various main menus. By pressing the
SELECT key, the selected main menu with the associated submenu items is selected and the
submenu items can be selected using the UP / DOWN keys. These are also acknowledged
with the SELECT key.
Then select the desired value with the UP / DOWN keys and confirm with SELECT. Exit vari-
ous menu items by pressing the MENU key.
Attention: The OSD menu can only be activated when the input signal is present!