Industrial Gigabit L2 Managed Ethernet Switch
Industrial Gigabit L2 Managed Ethernet Switch
3
4
Caution
Power on the system only after confirming that the wiring is correct, to avoid damage to the equipment. It
is recommended to use the power adapter and power cable to in the package to connect the power supply.
For better transmission performance, it is recommended to use high-performance Ethernet cable to
connect the switch and powered devices.
For better protection performance, it is recommended always to make the ground connection first and
disconnect it at the end when operating the device.
Before operating or maintaining the switch, please read the user manual carefully to avoid equipment
damage caused by misoperation.
Product Installation
1) Before installation, power off the equipment. Installation when device is powered on is prohibited.
2) The switch supports rack/desktop/wall mounted installation. Following with the rack-mounted installation
steps:
Step 1: Fix the bracket to the backside of the device with screws.
Accessories
Bracket
Screw
Step 2: Install the device to the DIN rail.
3) After step 2) is completed, please use high-performance Ethernet cable to connect the switch and the
device.
4) Check the installation and the wiring, after confirming that the connection is correct and reliable, power on
the switch.
The installation is completed.
Specifications
Items
4 + 2 Ports Switch
8 + 4 Ports Switch
Hardware Specifications
Downlink Ports
4*10/100/1000Base-T RJ-45
(Auto-MDI/MDI-X)
8*10/100/1000Base-T RJ-45
(Auto-MDI/MDI-X)
Uplink Ports
2*1000Base-X SFP
4*1000Base-X SFP
Console Port
1*RS-232 console port(115200,8,N,1)
Alarm Output
1*Relay
LED Indicators
2*Power indicators
1*Alarm indicator
2*SFP port indicators
4*Port Link/ACT indicators
4*PoE indicators(For PoE type only)
1*Fast Ring indicator
2*Power indicators
1*Alarm indicator
4*SFP port indicators
8*Port Link/ACT indicators
8*PoE indicators(For PoE type only)
Init Button
Short press to restart, Long press >5s to initialize the system
DIP Switch
Default mode: Disable Fast Ring function
Ring mode: Enable Fast Ring on X1~2 SFP
ports
N/A
Input Voltage
48~57V DC
Power Consumption
≤20W (Full load, not including PoE)
≤30W (Full load, not including PoE)
Dimensions(W*D*H)
163mm*110.5mm*46.5mm
Material
Metal shell
Installation
DIN-rail/wall mounted/desktop
Switch Property
Standards
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1Q, IEEE
802.1p, IEEE 802.3ad, IEEE 802.1D, IEEE 802.1X
Forwarding Modes
Store and Forward
Packet Buffer
4Mbit
MAC Table
8k
Switching Capacity
12Gbps/non-blocking
24Gbps/non-blocking
Packet Forwarding Rate
8.9Mpps
17.9Mpps
Jumbo Frame
10k bytes
Reliability
Surge Immunity
6kV, Standard: IEC6000-4-5
ESD Protection
6kV Contact Discharge, 8kV Air Discharge,
Standard:IEC61000-4-2
8kV Contact Discharge,15kV Air Discharge,
Standard:IEC61000-4-2
Operating Temperature
-40°C ~75°C
Storage Temperature
-40°C ~85°C
Operating Humidity
5%~95%(Non-condensation)
PoE
4 + 2 Ports PoE Switch
8 + 4 Ports PoE Switch
PoE Standard
IEEE 802.3af/at(PSE)
PoE Supply Type
End-span
PoE Pin Assignment
1/2(+),3/6(-)
PoE Budget
60W PoE for port 1, 30W PoE for other ports
60W PoE for port 1, 30W PoE for other ports
Version: V1.0, updated 2022.10.26.
The information in this document is subject to change without notice.
Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements,
information, and recommendations in this document do not constitute a warranty of any kind, express or implied.
