【
Installation Steps
】
1) Please turn off the signal source and the device's power, installation with power on may damage the
device;
2) Use network cable to connect IP camera with IPC's RJ45 port;
3) Use network cable to connect SV's RJ 45 port and NVR;
4) Use telephone cable or UTP cable/Coaxial cable to connect with IPC and SV's transmission port;
5) Check if the installation is correct and device is good, make sure all the connection is reliable and
power for the system;
6) Make sure every network device has power supply and work normally.
Hanger Installation Step:
