10/100Mbps Switch with 4/8-Port PoE
User Manual
1
2
Providing 4/8*10/100Base-TX PoE RJ45 ports and 2*10/100Base-TX uplink RJ45 ports, the
output PoE power of single port can be up to 30W, and the total PoE budget is 60W(4 ports) /
120W (8 ports). The PoE switch supports three working modes (DEFAULT, VLAN, CCTV),
and is widely used in video surveillance, network project,etc.
13.238.101.1932
V1.1
Cat5
e
/
6
PoE
Dome
Camera
PoE
IP
Camera
PoE
Dome
Camera
PoE
IP
Camera
LED
N VR
Power
Supply
Router
PoE
Switc
h
Application
Features
Notice
It is recommended to use the standard Cat5e/6 network cable to reach the optimal transmission
distance.
Providing 4/8*10/100Base-TX PoE RJ45 ports, MDI/MDIX, and 2*10/100Base-TX uplink
RJ45 ports.
Supports three working modes
DEFAULT. All ports are free to communicate.
VLAN. 1~4/8 ports are isolated from each other, but can communicate with uplink ports.
CCTV. The transmission distance can be up to 250m, but the rate is limited to 10Mbps.
Transmission distance: 0~100m (DEFAULT/VLAN mode), 250m (CCTV mode).
4+2/8+2 PoE Switch
Board Diagram
1) Please turn off the signal source and the device's power, installing with power on may damage
the device.
2) Use network cables to connect IP cameras with the product's 1~4/8 RJ45 Ethernet ports.
3) Use another network cable to connect switch’s UPLINK port with NVR or computer.
4) Connect switch with power adapter.
5) Make sure the installation is correct, no damage for the device , and all the connections are
reliable, then power up the system.
6) Make sure the power supply of every network device works normally.
Installation Steps
Please check the following items before installation, if missing, please contact the dealer.
PoE Switch 1pcs
Power Adapter 1pcs
AC
Power Cable 1pcs
User Manual 1pcs
Notice
The equipment must be anti-th under ground connected, otherwise the equipment protection will be
greatly reduced, please use 20AWG or thicker wire to connect grounding terminal to the ground.
Please follow installation steps as below
Front
Rear
CCT V
D EFAULT
VLAN
(
8-Port
）
(
4-Port
）
CCT V
D EFAULT
VLAN
DIP
Switch
DIP
Switch
(
8-Port
）
LED Indicator
(
10* Link/Act-Green, 8* PoE-Orange, 1* PWR-Green)
DC Jack
Grounding
PoE Downlink Port
Uplink RJ45 Port
(
4
-
Port
）
DC Jack
Uplink RJ45 Port
PoE Downlink Port
6
PoE
Link
6
Grounding
LED Indicator
(
6* Link/Act-Green, 4* PoE-Orange, 1* PWR-Green)
