Please follow installation steps as below:
Please check the following items before installation, if it is missing, please contact the dealer.
Ethernet Switch
1pc
AC
Power
Cable
1pc
Accessory
1pc
User
Manual
1pc
1) Turn off the power of all the related devices before the installation; otherwise the device would be
damaged;
)
)
4)
5)
6)
2 Connect PoE cameras with 1~8 downlink ports of product by Ethernet cable;
3 Connect
UPLINK
port
of
product
with
NVR or PC by Ethernet cable;
Connect power adapter;
Check if the installation is correct, equipment is in good condition, the connection is stable,then
power on for system;
Ensure the Ethernet equipment with power on can work properly.
Installaiton
Steps
Feature
1
2
Board
Diagram
Main
Function:
Ethernet
ports
;
Compliance with standards: IEEE802
.
3
、
IEEE802
.
3u
、
IEEE802
.
3ab
、
IEEE802
.
3z
、
IEEE802
.
3X
、
IEEE802
.
3af
/
at;
PoE
Power
Display
:
Support 8 LED digital tube display machine POE power usage. whole
machine reaches 135W PoE power output;
One
-
key
Smart: Support three kinds of working modes (Default, VLAN, CCTV);
Protection
:
Support
6KV surge immunity, EFT testing standard;
Operation
Environment
:
Support
-
10
℃~
45
℃
wide
-
temperature
;
Operation: Plug&play, convenient to use, support desktop, wall-mounted installations
.
Provide
8*10/100/1000Base-T
Ethernet
ports(PoE)
,
2
*
10/100/1000BASE-T
Application
The transmission distance depends on the signal source and cable quality; standard Cat5e/6
Ethernet cable is strongly suggested for reaching the maximum transmission distance!
Notice
1) Device must be connected with lightning protection grounding; otherwise protection level will be
greatly reduced; please use above No.20 wire to connect the grounding terminal;
2) The device requires rebooting after the dial switch has been utilized.
Back
Board
Front
Board
4口百兆以太网交换机
8 Ports Gigabit PoE Ethernet Switch
ing and other occasions.
8 Ports Gigabit PoE Ethernet Switch
Ethernet access and PoE applications. It provides eight Gigabit downlink ports, two Gigabit uplink
Ethernet port, The eight downlink ports support 802.3af/at standard and feature Max 30W PoE
power output of single port, Max 135W of whole machine. Support three kinds of work mode
(Default, VLAN, CCTV), and supports 8 LED digital tube display machine PoE power usage. It can
be widely used in security surveillance, hotels, schools, SMB engineer
is an unmanaged Ethernet switch designed for Gigabit
V1.0
One key smart
Power
LED
Power
Port
PoE Ethernet Ports
Uplink
Ethernet Port
Grounding
8 Ports Gigabit PoE Ethernet Switch
User Manual
Notice
Cat5
e/6
LCD
NVR
IP Camera
8 P
orts G
iga
bit P
oE S
witc
h
AP
AP
IP Camera
POE power display
AP
