How to charge
Step
1
．
Plug the charger into the headset.
2
．
Plug the other end the charger into an electrical outlet. As the picture indicator.
During charging, the headset indicator turns on and remains on until charging completes.
The headset will not work while charging. Your headset fully charges in approximately two hours.
3
．
When charging completes (indicator off), remove the charger for electrical outlet..
Note:
You can also use a Original Vehicle Power Adapter to charge the headset battery while in your vehicle.
A fully charged headset battery provides approximately
*8 hours talk time
* 160 hours standby time
Wearing Your headset
Attention:
Mustn’t to wear the headset like this. That is mobile phone and the headset must be in
the same way. Or maybe cause noise and interference.
When packaged, the headset is configured for ware on the right ear.
Step
1.
Open the ear hook follow the arrowhead point
2.
Loop the ear hook over your ear.
3.
Point the microphone toward your mouth
The ear hook can adjust up or down and left right exchange, as below figure.
How to operate the headset with silica gel ear tip?
←----1
←----2
1)
Gently lift then pull the top of the ear hook up and off the upper hinge pin. Then pull it away
to remove it. (like the arrowhead point)
2)
Take off the soft ear tip as the figure 2.