IMPORTANT NOTE FOR CHANNEL SELECTION
Search the CH 1-CH 4 and select the best one for optimum reception in
your area. Both transmitter and receiver must be set to the same channel.
INSTALLATION OF WIRELESS TRANSMITTER
THE MAXIMUM RANGE IS 300 FT WITHOUT LOSS OF ANY PICTURE / SOUND QUALITY
12V 500mA
AC Adaptor TRANSMITTER
RCA cable(Optional)
Rear OF VCR
Rear of TV RF Cable
Note
: Be sure to set the power on the transmitter to "OFF" before following steps
below.
1. Connect one end (triple plugs) of the RCA cable to the A/V jacks on the transmitter,
and the other end to the Audio/Video Out jacks on your VCR.
Be sure to match the color of the plugs in both connection.
If your VCR has only one audio out jack (mono sound), connect the white
plug(Audio-L) to your VCR.
2. If you want to use the system with a nearby TV, connect one end of the supplied
RF cable to the VHF Out jack on your VCR, and the other end to the antenna In
jack on your TV.
3. To receive cable transmission on your TV without the cable converting box, connect
the cable TV input source to the VHF In jack on your VCR.
4. Turn on the transmitter and search the channel 1-4 by pressing the Channel selector,
