UH-2VE: HDMI 2.0 1x2 Splitter with 4K to 1080P Down-scaling
U.T.E. electronic GmbH & Co. KG
6
www.ute.de
6. Firmware Upgrade
Please follow the below steps to upgrade firmware by the Micro-USB port:
Step1.
Connect the UH-2VE to the PC with USB cable.
Step2.
Power on the HDMI 2.0 1x2 Splitter UH-2VE, and then the PC will automatically
detect a U-
disk named of “BOOTDISK”.
Step3.
Double-click to open the U-
disk, a file named of “READY.TXT” will be showed.
Step4.
Copy the latest upgrade file (.bin) t
o the “BOOTDISK” U-disk directly.
Step5.
If the filename “READY.TXT” automatically turns to “SUCCESS.TXT”, the
firmware was upgraded successfully. If the firmware upgrade failed, please
check the file (.bin) and then follow the above procedure to operate again.
Step6.
Remove the USB cable after firmware upgrade.
