13
Using the UDI-28
Turning UDI-28
™ On and Off
To turn the UDI-28™ on
:
1.
Press and hold the
Enter
button for about 5 seconds. The UTC Proprietary screen opens.
(If pushing the Enter button for a short time, a message on the screen will appear mentioning
the need for a longer push)
NOTE
: The UTC Proprietary screen contains a disclaimer. Clicking on the
Enter
button signifies that
you accept responsibility for use of the UDI-28, and that you accept the terms of the disclaimer.
If you do not agree, please do not dive with the UDI-28™.
2.
Press the
Enter
button again. The current settings screen opens.
3.
Press the
Enter
button again. The setup menu opens. After a few seconds, the dive info
displays.
Standby mode:
The UDI-28™ unit goes into Standby mode after 10 minutes of inactivity on the surface.
The UDI-28™ unit goes from Standby to ‘Off’ after 1 hour of inactivity on the surface.
When in Standby mode, the UDI-28™ unit instantly returns to use upon contact with water,
or when a button is pushed for 2 seconds.
To turn UDI-28™ off
:
Press and hold the
Enter
button for about 6 seconds. The UDI-28™ turns off.
WARNING
: Power
cannot
be turned off during a dive.
Scrolling the menus
To scroll through the menu options, press the
Up
or
Down
buttons.
To select an option, press the
Enter
button.
