UTC LifeGard, Инструкция пользователя

Страница: 10 / 12

10
Remote Phone Control
The 2-way audio functions of the LifeGard system can be accessed from an off-site
phone. You can listen in to the room, talk or have a 2-way conversation with some-
one near the LifeGard system.
Connecting to the LifeGard system
The method of connecting to the LifeGard system through an off-site phone is
dependent on how a programming option (Option 20: Ring/Hang/Ring) is pro-
grammed by your installer. The following instructions assume your system is set to
the factory default of 1. This setting is used when an answering machine exists on
the same phone line as the LifeGard system. Ask your installer for instructions if
the option is not set to 1.
To connect to the LifeGard system:
1. Call the panel location.
2. Let the phone ring once, then hang up.
3. Wait at least 10 seconds but no more than 40, then call the panel location again.
The panel should answer on the first ring.
4. Enter
‚
+ Master Access Code + one of the following numbers:
❑
0 or 1 to talk through the panel
❑
2 to have a 2-way conversation through the panel
❑
3 or 6 to listen through the panel
❑
99 to end the connection
Note
The default Master Access Code is 1234. Contact your installer about changing this
access code.
Pager Communication
Your system can be set up by your installer to report to a numeric display pager. Use
the following table to determine which report the pager is displaying.
Table 1: Pager Reporting Message
Report Pager Display
Phone Test -101-101
AC Power Restoral -102-102
AC Power Failure -103-103
Call Button Panic -107-107
Wrist/Pendant Panic -108-108