UTC. All Rights Reserved.
6
P/N 0000000 – Rev. A – 06 Nov 12
Operation Characteristics
LED Display
Alarm Sound
Units Status
Control Panel
Status
Recommendation
Normal operation
Green Power LED
flashes every 30
seconds.
None.
Normal DC operation
(sensing no CO) and
with good batteries.
Normal operating
condition.
None.
Carbon monoxide alarm
Red Alarm LED flashes
with beeps.
Four quick beeps, 5
seconds silence,
repeating.
Alarm condition.
Dangerous
concentrations of CO
detected.
Alarm condition.
None.
Low battery / low battery
hush
Red Alarm LED flashes
every 60 seconds.
One quick beep every
60 seconds.
Batteries need to be
replaced.
Trouble condition,
trouble beeps every 60
seconds.
Replace all three AA batteries.
Press Test/Hush button and release. This
will silence the low battery audible chirp
between 8 and 11 hours allowing for a
more convenient time to replace the
batteries.
Alarm end-of-life indicator
Red Alarm LED flashes
two times every 30
seconds.
Two quick beeps
every 30 seconds.
End of CO Alarm life.
Trouble condition,
trouble beeps every 60
seconds.
Press the Test/Hush button and release.
This will silence the end-of-life signal for
up to three days. After three days, the unit
will resume end-of-life chirps. Hush mode
will silence the alarm ten times or up to 30
days. After 30 days, the unit can no longer
be hushed. Replace the CO Alarm
immediately. The unit will not respond to
CO.
Trouble/service alarm
Red Alarm LED flashes
every 30 seconds.
One quick beep every
30 seconds.
Unit is in trouble
condition.
Trouble condition,
trouble beeps every 60
seconds.
Replace batteries. If condition continues,
unit has malfunctioned. Replace
immediately. Unit will not respond to CO.
Error condition
Red Alarm LED
constantly on.
Constant alarm.
Very low battery or
unit malfunction.
Trouble condition,
trouble beeps every 60
seconds.
Replace batteries. If condition continues,
unit has malfunctioned. Replace
immediately. Unit will not respond to CO.
Test mode
Red Alarm LED flashes
with beeps.
Four quick beeps, 5
seconds silence,
repeated once.
Normal operation
when Test/Hush
button is pressed.
Sensor test mode
CO not detected. Alarm for test purposes
only.
Tamper
Red Alarm LED flashes
every 30 seconds.
One quick beep every
30 seconds.
Unit is in tamper
condition.
Trouble condition,
trouble beeps every 60
seconds.
Place alarm body back onto mounting
plate. If condition continues, unit has
malfunctioned. Replace immediately.
14.
Specifications
Compatible panels
-
Power
Three AA battery
Battery type
1.5 VDC Alkaline
Duracell MN 1500 or MX 1500,
Energizer E91
Standby Current
35
µ
A (typically)
Battery Life
5 years (typically)
Sensor Life
10 years
Alarm Response Time
70 PPM = 60-240 min.
150 PPM = 10-50 min.
400 PPM = 4-15 min.
Audible alarm
85 dBa @ 10’ (3M) temporal 4
Low Battery Beep
1 every 60 seconds.
RF Wireless Frequency
2.4 GHz
Weight w/battery
0.20 lbs / 0.09 kg
Dimensions
5.6" x 2.4" (14.2cm x 6.1cm)
Storage temperature
-4 to 140°F (-20 to 60°C)
Operating environment
40 to 100°F (4.4 to 37.8°C)
Relative Humidity
10 to 95% non-condensing
15.
Regulatory Information
Manufacturer: UTC Fire & Security
WEEE Directive
2002/96/EC (WEEE directive): Products marked with this symbol cannot
be disposed of as unsorted municipal waste in the
European Union. For proper recycling, return this product to
your local supplier upon the purchase of equivalent new
equipment, or dispose of it at designated collection points.
For more information see: www.recyclethis.info.
RoHs Directive
2002/95/EC RoHS Compliant. Hereby, UTC Fire & Security declares that
this product does not contain lead, mercury, cadmium, hexavalent
chromium, polybrominated biphenyls (PBB) or polybrominated
depheny ethers (PBDE) in more than the percentage specified by EU
directive 2002/95/EC, except exemptions stated in EU directive
2002/95/EC annex.
UL Rating
ANSI/UL 2034 Recognized
FCC Compliance
FCC ID: QPY-263XCO-Z
IC: 8303B-263XCO-Z
