EN 6
TruVision Megapixel IP Camera Quick Start Guide
Figure 2: Side view of 2.0 megapixel box camera
1. Camera
2. Focus
adjustment
3. Lens
interface
4. Lens. Not included
Setting up the camera
Note:
If the light source where the camera is installed experiences
rapid, wide variations in lighting, the camera may not operate as
intended.
For detailed instructions, please refer to the user manual.
To quickly put the camera into operation:
1. Prepare the mounting surface.
2. Mount the camera to the wall/ceiling using the appropriate
fasteners. See the user manual for further details.
3. Connect the cables to the camera. See “Connecting the devices”
on page 7.
4. Set up the camera’s network and streaming parameters so that the
camera can be controlled over the network. See “Accessing the
camera over the internet” on page 8.
5. Program the camera to suit its location. See “Configuring the
camera” on page 12.
6. Set up the connections to a DVR and configure the DVR for the
camera.
