UTC Fire and Security interlogix AL-1191, Руководство по программированию

Страница: 21 / 24

15
Credits and relay time
To set up credit and relay timing, do the following:
1. From the display in
Figure 38
, enter
14
and
press
Enter
to access option 14.
Figure 38. Smart card reader display
2. Enter the token value and press
Enter
(
Figure 39
).
Figure 39. Token value display
3. Enter the credit account to use and press
Enter
(
Figure 40
).
Figure 40. Account number display
4. Enter the access level required and press
Enter
(
Figure 41
),
Figure 41. Access level display
5. Enter the location number and press
Enter
(
Figure 42
).
Figure 42. Location number display
6. Enter the relay time factor and press
Enter
(
Figure 43
).
Figure 43. Relay time factor display
7. If no credit relay is set in option 8 (see
Relay
option
on page 11), a warning appears
(
Figure 44
).
Press
Enter
to exit the menu.
Figure 44. Warning display
Smart Reader AL-1191/AL-1193
0-Exit, Menu:
Token Value:0
(0-65535) No:
Account No: 1
(1-4)No:
Access Level:1
(1-16)No:
Location:1
(1-4)No:
Relay Time Factor:5
(1-256)No:
No Credit Relay, See menu 8
#-Exit