UTC Fire and Security interlogix AL-1191, Руководство по программированию

Страница: 18 / 24

Smart Card Reader
Programming Manual
12
Configuration cards
You can set up the reader with a configuration (option) card. You can change the reader’s configuration more
than once with a configuration card.
To enable a configuration card, do the following:
2. Press
Menu
to toggle between the enabled and disabled options. Press
Enter
to exit the menu and save
the displayed option.
Note: To enable the option card again, change this option to enabled, default the reader, or set this option in a configuration
card if this option has not been used already. After disabling this option, a configuration card can only be used once.
1. From the display in
Figure 29
, enter
9
and
press
Enter
to access option 9.
The default display shows
Option Card
Enabled
(
Figure 30
).
Figure 29. Smart reader menu display
Figure 30. Option card enabled display
Smart Reader AL-1191/AL-1193
0-Exit, Menu:
Option Card Enabled
*-Change, #-Exit