VS-MKII Control System
Chubb Fire & Security Pty Ltd
Technical Manual
Page 10 of 63
Topic 2: Installation
Depending on the type and size of equipment requiring protection, the MKII can be configured with multiple
actuation and detection devices.
Figure 8 – Typical fire system configuration
The MKII can be customised to suit just about any application. The settings that can be altered and the
degree to which they can be customised are detailed in the ‘Channels’ section on Page 11.
Each component of the MKII must be located and positioned according to its function.
Before installing any system component you should assess the intended location will;
•
Provide access for operational and maintenance purposes.
•
Provide a high degree protection from potential damage
•
Be compliant with the Chubb specifications and customers requirements.
The recommended wire gauge size for all power, inputs and outputs of the MKII is as per the following table;
Diameter AWG size Amp Capacity
0.75mm
18
6
Table 1 – Wire gauge