manualshive.com logo in svg

Utax PF 420, Руководство по обслуживанию

Поделиться
Скачать
Utax PF 420 Скачать руководство пользователя страница 33

3MH

1-3-10

U053

Performing fine adjustment of the motor speed
Description

Performs fine adjustment of the speeds of the motors.

Purpose

Used to adjust the speed of the respective motors when the magnification is not correct. Also speed adjust-
ment for each paper source can be performed in group 2.

Method
Setting

1. Press the start key.
2. Select the group using the image mode selection key.
3. Select the item to be set using the exposure adjustment keys.

: Off, 

: On

Adjustment

1. Press the interrupt key.
2. Press the start key to output a VTC pattern.

Figure 1-3-6

3. Change the setting value using the zoom +/- keys.

A: Drive motor speed adjustment

Increasing the setting makes the image longer in the auxiliary scanning direction, and decreasing it 
makes the image shorter in the auxiliary scanning direction.

B: Polygon motor speed adjustment

Increasing the setting makes the image shorter in the main scanning direction, and decreasing it 
makes the image longer in the main scanning direction.

4. Press the start key. The value is set.

Completion

Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.

Maintenance

item No.

Description

Image mode 
LEDs

Exposure
indicator

Description

Setting
range

Initial
setting

Exp. 1 (lit)
Exp. 2 (lit)
Exp. 3 (lit)
Exp. 4 (lit)
Exp. 5 (lit)
Exp. 1 (flashing)
Exp. 2 (flashing)

Drive motor speed adjustment
Polygon motor speed adjustment
Eject motor speed adjustment
Drum motor speed adjustment
Eject motor speed adjustment 2
Eject motor speed adjustment 3
Eject motor speed adjustment 4

-5.0 to 5.0
-5.0 to 4.0
-5.0 to 5.0
-5.0 to 5.0
-5.0 to 5.0
-5.0 to 5.0
0.0 to 5.0

0.3
0.7
-0.5
0
0
0
0.5

Exp. 1 (lit)
Exp. 2 (lit)
Exp. 3 (lit)

Motor speed adjustment (for paper
feed from MP tray)
Motor speed adjustment (for paper
feed from paper feeder)
Motor speed adjustment
(in duplex mode)

-5.0 to 5.0

-5.0 to 5.0

-5.0 to 5.0

-0.1

-0.1

-0.3

Correct values for an A3/Ledger output are:
A = 300 

±

 1.0 mm

B = 270 

±

 1.0 mm

Содержание PF 420














































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды