Utax LP 3230, Инструкция по эксплуатации

Страница: 147 / 189

7-50 Using the Operation Panel
Duplex (Duplex printing error detection setting)
If the error detection setting for duplex printing has been turned
On
, and
you attempt to print onto a paper size and paper type that cannot be
used for duplex printing, the
Duplex disabled Press GO
error
message will be displayed and printing will stop.
1
Press
Z
while
>Error Handling >
is displayed.
2
Press
U
or
V
repeatedly until
>>Duplex
appears.
3
Press [OK]. A blinking question mark (
?
) appears.
4
Select
On
or
Off
using
U
or
V
.
5
Press [OK].
6
Press [MENU]. The display returns to
Ready
.
Paper Mismatch (Detection settings for paper size/type errors
when the paper source is fixed)
Turn this setting to
Off
if you want to continue printing even if the paper
size or type you specified is different from the fixed paper source, or turn
it to
On
to have the paper feed error displayed.
1
Press
Z
while
>Error Handling >
is displayed.
2
Press
U
or
V
repeatedly until
>>Paper Mismatch
appears.
3
Press [OK]. A blinking question mark (
?
) appears.
4
Select
On
or
Off
using
U
or
V
.
5
Press [OK].
6
Press [MENU]. The display returns to
Ready
.
On • To print onto one-side of the paper only when this
message is displayed, press [GO].
• Press [Cancel] to cancel the printing itself.
Off • To print onto one-side of the paper.
>>Duplex
? Off
>>Paper Mismatch
? On