Utax FAX 542, Инструкция по эксплуатации

Страница: 45 / 132

Setting your machine
3-9
Op
eration
Se
tting y
o
ur
mac
h
ine
Getting started
Directory
M
aintenance
Safety
Contents
Installation
Date en cours : 12 June 2006
C:\Documents and Settings\G092899\Bureau\En cours\UK\Setting your machine Gb.fm
11 - RX SPEED
1 - 33600
2 - 14400
3 - 9600
4 - 4800
5 - 2400 Transmission speed for incoming documents.
For a quality telephone line (compatible, no echo),
communications occur at maximum speed.
However, it may be necessary to restrict the transmission
speed for some calls.
12 - RINGS 2 TO 5
Number of rings to automatically start your machine.
20 - E.C.M. 1 - WITH
2 - WITHOUT
This parameter helps correct the calls made on disturbed
telephone lines. It is used when the lines are weak or too
noisy. Transmission times may be longer.
70 - NET VALID 06:01 TO 21:59 This parameter lets you modify the period when the fax
connects automatically to the Internet.
This menu is available only if the connection type is set to
PERIODIC
(
M 941
).
71 - NET ACTIVE 7 DAYS / WEEK
MON TO FRI This parameter lets you select the days of the week when the
fax connects automatically to the Internet.
This menu is available only if the connection type is set to
PERIODIC
(
M 941
).
72 - MODEM SPEED 1 - 56000
2 - 33600
3 - 14400
4 - 12000
5 - 9600
6 - 7200
7 - 4800
8 - 2400
9 - 1200
0 - 600
Choice of maximum Internet transmission speed.
For a quality telephone line (compatible, no echo),
communications occur at the maximum speed.
However, it may be necessary to restrict the transmission
speed for some Internet calls (bad line or bad ISP settings).
73 - IMPROVE
REP @ 1 - WITH
2 - WITHOUT This parameter lets you automatically register the Internet
address of your subscribers fax during a call (if available).
74 - ERASE
MAILBOX 1 - WITH When the fax machine receives an e-mail with an attachment
and cannot open it, it erases the message from the ISP MBX,
prints and transmits with a notice of uncomprehension to the
message sender.
2 - WITHOUT At E-mail reception, the fax does not destroy the MBX
message, it prints a
notice of uncomprehension asking you
to recuperate this message with your computer equipment.
This parameter is useful only if you have PC equipment. The
memory capacity is limited, you need to empty your MBX or
else new messages may not be received.
Parameter Setting Signification