manualshive.com logo in svg

Utax CLP 3521, Руководство по обслуживанию, Страница: 46 / 187

Поделиться
Скачать
Utax CLP 3521 Скачать руководство пользователя страница 46

2HL/2HM/2HN

1-3-11

Developer refreshing
Description

The laser output of the image data for developer refreshing is carried out, and operation to 
exposure, developing, and primary transfer is performed by 10 pages. (Paper is not fed)

Purpose

To perform cleaning when faulty images occur and a line appears longitudinally.

Procedure

1. Enter the service mode [>>DEV-CLN].
2. Press the OK key. [>>DEV-CLN?] will be displayed.
3. Press the OK key. Developer refreshing will be started.

Completion

Figure 1-3-4Developer refreshing Image data

LSU dust shield glass and main charger cleaning
Description

The LSU cleaning motor drives the cleaning pad which in turn wipes clean the LSU dust 
shield glass.
The main charger cleaning motor drives the cleaning pad which in turn wipes clean the main 
charger wire and the main charger grid.

Purpose

To perform cleaning when the printed image is bad and stripes are seen in the vertical direc-
tion.

Procedure

1. Enter the service mode [>>LSU/Charger].
2. Press the OK key. [>>LSU/Charger?] will be displayed.
3. Press the OK key. LSU dust shield glass and main charger cleaning will be started.

Completion

Service items

Description

>>DEV-CLN

A4 paper size

200 mm

33 mm

Toner image on the transfer belt

>>LSU/Charger

Содержание CLP 3521




























































































































































































Отзывы:

Нет отзывов