USX-MOUNT XMM016-03, Инструкция по эксплуатации

Страница: 11 / 35

3. Drill pilot holes using a 5/32 in. (4 mm) diameter drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 2.36 in. (60 mm). Be sure to drill into the center
of the studs.
4. Install wall plate using three lag bolts . Tighten the lag bolts only until they are pulled firmly
against the wall plate.
CAUTION: Improper use could reduce the holding power of the lag bolt.
DO NOT over-tighten the lag bolts .
Go to STEP 3 on PAGE 14
5/32"
(4.0mm)
11
No!
2.36"(60mm)
Wall plate